Bras de perche de microphone
Appareil de support de téléphone tablette/
Pince en C
Pièce de montage à œillets
Filetage 1/4",3/8",5/8"
150 mm. Barre d'extension
Manuel d'utilisation
Allen
BIENVENUE SUR NOTRE LOGO ET NOTRE SITE WEB MISE À JOUR. LIVRAISON GRATUITE EN 3 JOURS POUR LES COMMANDES DE 50 $ OU PLUS.
Impossible de charger la disponibilité du service de retrait

Support anti-choc SM1

Filtre U-Pop
Livraison GRATUITE en 3 jours*
Essai sans risque de 90 jours*
Promesse du meilleur prix*

Libérez votre créativité et capturez l'essence de votre talent artistique avec notre Boom Arm. Conçu pour les enregistrements de qualité professionnelle, il offre un positionnement et une stabilité précis pour un son impeccable.
Avec son design élégant et intuitif, vous pouvez vous concentrer sur ce qui compte le plus : votre expression créative. Améliorez votre expérience d'enregistrement, libérez votre véritable potentiel et proposez un contenu exceptionnel qui inspire et trouve un écho auprès de votre public. Il est temps de libérer votre talent, de créer avec précision et d'enregistrer comme un vrai professionnel.

Entrez dans le monde de l’excellence du streaming avec notre Boom Arm. Prenez le contrôle de votre configuration audio et devenez le maître du streaming que vous aspirez à être. Obtenez un son cristallin, un réglage fluide et des performances de qualité professionnelle.
Maintenez un espace de travail bien rangé et une concentration ininterrompue grâce à notre solution de gestion des câbles cachée. Gardez vos câbles bien rangés, garantissant une configuration propre et organisée pour une productivité améliorée et une expérience de streaming immersive.
Notre support anti-choc pour microphone de haute qualité est conçu pour améliorer votre expérience d'enregistrement. Compatible avec une large gamme de microphones standards, il offre une stabilité et une isolation exceptionnelles, garantissant une reproduction sonore d'une clarté cristalline.
Compatibilité universelle des micros
Faites l’expérience d’une intégration transparente avec n’importe quel microphone. Offre une intégration transparente avec n'importe quel microphone, offrant un ajustement parfait à tous les modèles.
Couverture magnétique
Ajustez la vis dans le sens des aiguilles d'une montre lorsque le bras du support ne peut pas tenir debout.
Lézard | Bras de flèche
Hauteur supplémentaire
Oui
Adaptateur 3/8,5/8
Oui
Chaîne câblée
Oui
Pliable
Oui
Vaillant | Bras de flèche
Hauteur supplémentaire
Oui
Adaptateur 3/8,5/8
Oui
Chaîne câblée
Oui
Pliable
Oui
Capitaine | Bras de flèche
Hauteur supplémentaire
Non
Adaptateur 3/8,5/8
Oui
Chaîne câblée
Oui
Pliable
Oui
Bras de perche de microphone
Appareil de support de téléphone tablette/
Pince en C
Pièce de montage à œillets
Filetage 1/4",3/8",5/8"
150 mm. Barre d'extension
Manuel d'utilisation
Allen
Accessoires
Accessoires
Accessoires
Accessoires
Longueur totale : 43"Après avoir été installé sur la table, sa longueur est de 38,2"
Pinces en C Taille de l'article : 5,1 po. Base de serrage en C : min. 0,4 po, maximum. 2,36 pouces.
Il n'y a pas de support anti-choc dans la boîte.
Non, juste le bras du microphone.
2,2 lb. Vous pouvez l'utiliser avec tous les microphones pesant et dotés d'une entrée adaptateur de 1/4, 3/8 ou 5/8.
La largeur de serrage maximale est de 2,36" (5,99 cm)
À l’intérieur du bras de flèche se trouve un câble métallique. Avec la vis de tension, vous pouvez soit resserrer la tension sur le câble, soit la desserrer.
1
Entrez votre email ci-dessous
2
Confirmez votre abonnement
3
Code de réduction : BIENVENUE10
*Pour profiter de votre offre, vous devez vous inscrire aux e-mails et aux communications Ixtech et créer un compte My I-XTECH. Le bon sera envoyé par e-mail. Offre valable sur les achats de 50 $ USD ou plus. D'autres exclusions peuvent s'appliquer.
THIS THING IS AMAZING!!!
Here in the UK, it's hard to find a white standard desk mounted boom arm. Most are low profile ones, or big brands at 3 figures.
This arm is solid, has cable management (can fit an XLR cable, no problem), can be clamp mounted or with a grommet. The boom end is metal compared to many others in the same price range using plastic.
I purchased the Valiant Boom and it's terrific. The extension pole wasn't on my radar however... It's a cool option. I teach classes and hate sitting down. The extension allows me to stand up and the boom extends all the way out with confidence.
Jason L. Perez
The Insurance School .com
iPower Moves Podcast
This boom arm is exactly what I needed and was priced perfectly! So happy there was an extended vertical rod included to give it the extra height! Amazing product!
Amazing quality, beautiful sleek build, I’m all about aesthetics and stability and this has it all.
The IXTECH Microphone Boom Arm (CAPTAIN Model) is a top-notch accessory for audio enthusiasts. Its solid construction supports a variety of microphones, including popular models like the Blue Yeti and Shure SM7B. The adjustable tension knobs ensure a secure and vibration-free setup. With 360-degree rotation and smooth height adjustment, it offers great flexibility. The integrated cable management system keeps things tidy. Installation is hassle-free, and it clamps securely to any desk. Priced competitively, this boom arm is an excellent investment. If you're a gamer, podcaster, or streamer seeking professional audio quality, look no further. Highly recommended!
I needed a microphone arm for streaming, and really wanted one that looked cool. I found this microphone arm and it had sleek edges and a modern design that fit my desk aesthetic perfectly. It’s very well-made, and the arm function is silky smooth. I can move it around in any position I need due to the number of joints and hinges this microphone arm has. So glad I found this and wish I purchased it sooner.
THIS THING IS AMAZING!!!
Here in the UK, it's hard to find a white standard desk mounted boom arm. Most are low profile ones, or big brands at 3 figures.
This arm is solid, has cable management (can fit an XLR cable, no problem), can be clamp mounted or with a grommet. The boom end is metal compared to many others in the same price range using plastic.
I purchased the Valiant Boom and it's terrific. The extension pole wasn't on my radar however... It's a cool option. I teach classes and hate sitting down. The extension allows me to stand up and the boom extends all the way out with confidence.
Jason L. Perez
The Insurance School .com
iPower Moves Podcast
This boom arm is exactly what I needed and was priced perfectly! So happy there was an extended vertical rod included to give it the extra height! Amazing product!
Amazing quality, beautiful sleek build, I’m all about aesthetics and stability and this has it all.
Excellent. What I'd been searching for, as it suits my needs. Well made, good materials & construction. One could not find a better price.
The I-XTECH Valiant boom arm is excellent! And, it was easy to assemble right out of the box. I will be using this site for all of my microphone needs.
Perfect for my microphone for work and for gaming. Adjusts and stays in place solidly. No complaints. Looks sharp too.
Great product! I am happy with my purchase. The seller provided great support.
I love how easy it is to attach and remove the pop filter from my microphone. It does a great job at filtering out noise .
i like it
I can move my heavy mic in an position and it doesn't move. It has slots to hide the wires. This can be mounted to the side of a table or through the hole for wire management
This product was delivered in good packaging with no damages. It was not hard to set up the C-Clamp on my desk and there was no issues of bending or breaking as the clamp itself is a sturdy metal. The only installation issue I had with the product was the ball joint at the end felt like it didn't fit over the nub quite as well as it should.I have a Heil PR40 with shockmount which does not have any issues of weight with this arm. The cord hub is a decent size and length with no XLR visible except for at the mic and at the elbow of the arm. Only complaint is I with the lower angle of the arm was a tad more flexible.
This boom arm hands down is the best boom arm I have ordered.the materials used are not cheap and supports my tablets (used as a tablet) mount.it stays in place and looks sharp on my deskIt is very sturdy I expect this to outlast my setup!
Very sturdy, worked very well....
I got this to replace my old pop filter that I've been using on an AT2020. It fit's nicely and works well so far. I have not had any complaints about sound quality or popping.
Very beautiful and great quality, very happy with this item, I will recommend to friends and family.
This pop filter is very easy to use because instead of attaching to a boom arm, it attaches directly to your microphone. It is inexpensive however, that does not mean it is cheap. It feels like a good quality pop filter and the rubber bands that hold it to the microphone don't feel flimsy like they will snap. If you have one of the circular ones that feels like pantyhose is stretched over it, you can double up and use both filters.
Using this daily with a Blue Yeti X for all my meetings as a software developer. It's quite a good looking mount that does hide almost all cabling, and it's extremely sturdy and easy to adjust, with no squeaking after months of usage. Range/reach of it is fantastic for almost every desk too.I've tried about a half dozen different mounts off of Amazon and this one is still my favourite, so I can really recommend it. Price is a bit high, but worth it if you plan to use it day in and day out. So far, even better durability than the professional Mika arms I used when I worked as a broadcast engineer!
its better then most arms seeing I can kind of put of on the edge of my desk next to the wall sadly it dos fold into the wall like every other, it creeks when moving and having the mic upside down exposes that the ball joint at the end before the mic can't hold it so it bends and flops due to the weight the rest of the arm is good though but the plastic on the arm feels holo and cheap looks great and folds out when I need it
It does help with sound quality and plosives. But I personally prefer the foam pop filters or the round mesh ones.Just seem to help more.You get what you pay for with this one though! Still nice to have over nothing at all.
I had been using the pretty typical and cheap metal arm with externally exposed springs for my Rode NT1 5th Gen, but found that it constantly sagged and I just couldn’t get things tight enough to stay in place. I have contemplated getting a nicer arm like this one from IXTECH, so when I ran across it, I figured why not and ordered it.The arm is well build and solid. It comes well packed in a cardboard box with everything bagged and separated to keep it securely in place for shipping and reasonably organized. The instructions are pretty good, but I found the arm to be relatively intuitive to get setup and the way I wanted it. It comes with everything you need (only one tool) to install and tweak things to your liking, so you don’t have to rummage around in your toolbox for whatever tools are needed.The arm is smooth and modern looking, which is a huge improvement over the old desk lamp look of the cheap arm this replaces. This arm is slightly larger than the usual spring loaded cheap arms, but not by a lot and it comes with an extra height extension if you need it (I didn’t, but it is certainly solid like the rest of the arm). The table C-clamp is a bit larger than what I used to have, so I did have to pull my desk away from the wall a little to squeeze it in, but it left plenty of room for me to push my desk back and have loads of clearance. The only issue I would point out with the clamp is that it is only padded for the underside of your desk and not the top, so you might want to add a felt pad or foam to protect your desk if you are worried about damaging it (I wasn’t as my desk is made from a hardwood that is like none other I have ever come across).The arm allows for adjustment of the preload/tension to support whatever you mount on the end. I found that right out of the box it perfectly supported my 2+ lbs Rode NT1 5th Gen with its suspension mount and pop filter, and I didn’t have to make any adjustments. I did have an issue with the mount at the end of the arm as it is a ball mount and it keeps wanting to sag no matter how tight I make it. I think if this was rubber coated or at least mat and not smooth, it would grip the clamp better and not slip as much (ball mounts are notorious for not being able to support much weight or deal with vibration, so I wasn’t overly surprised, but this has been overcome with rubber or soft plastic coatings, rough surfaces, and sometimes set screws). I guess if I hung it upside down instead of running the threads up, it would stand a better chance of staying in place (but I didn’t find the positioning that way as ideal for my cramped desk setup).A nice touch was the knurled threaded end to mount your microphone to. It provides a good feel and helps to get a snug fit. It also comes with both the standard sized smaller and larger threads (3/8 and 5/8), so it should be compatible with most, if not all microphones/mounts. Being advertised as universal, I guess this should be expected.The arms have hollow backs to them, which gives a space to run cables threw and keep things hidden and tidy. This worked well and I was able to easily get my mic cable in the tray, but I will note that the caps for the cable tray need to slide off from one end or the other, which means you need enough clearance equal to the length of the cover. This meant that I needed to extend the arm to provide that clearance, place the cable inside, reinstall the cover, then reposition the arm where I wanted it. This isn’t a huge issue, but something to keep in mind for when you have to add or remove a cable from the arm’s built in cable tray.Overall, this is a real nice microphone stand and an upgrade I am happy with. Besides looking significantly nicer, it supports my professional microphone much better than the standard, and older design cheap arm. I think the ball mount could use a minor materials/finish upgrade to improve friction in the joint, the cable management covers could be hinged and/or magnetic to allow for easier access without repositioning the arm, and the desk clamp could use one more piece of foam rubber to help protect the top surface of a desk, but other than that, this is a solid and well worth it arm.
This mic boom is solidly built and works very well. It attaches in a very sturdy way to my desk, though the top of the C-clamp has no padding on it. You might want to put a thin piece of rubber between the top of the clamp and desk surface to avoid marring the top of your desk.The boom arm is solid and stays where it is positioned. The mic cables run through the boom arm and are hidden from view. I can't really think of anything I'd change about this mic boom aside from adding a pad for the top of the C-clamp. It is well designed and built and I'd recommend it.
Looks and works great!!! Quality materials and workmanship makes a great product!!! very sturdy and holds positions well!
This is a great microphone boom arm that is slim enough to fit on your desk. I have this mounted via the clamp and is sturdy enough to hold my microphone up. The arm comes with cable management sleeves to keep your desk clear and clean. Perfect arm!
Awesome mic boom that fits my mic perfectly! Super easy to set up even for a newbie. I loved how easy it was to get this mounted and going. I also really appreciated the warning on it for during setup. Ypu can move this any way that you need it to and you can mount it to any table. Has a clamp mount or a mount fir if you have a hole drilled.